Building a multi-room audio system often comes down to one challenge: bringing all your sources together and sending audio exactly where you want it.
AudioMate solves that. It acts as a bridge between your traditional audio/video devices and your Juke system, giving you flexible control of them all anywhere in the home or commercial space without needing to run long cabling from each device back to the central location as is common with traditional systems.
The AudioMate connects to the local network (Ethernet or Wi-Fi) and can be conveniently placed wherever your audio devices are, such as behind a TV in a bedroom, next to a turntable in an office, or behind a subwoofer on the living room floor allowing the flexibility to incorporate all of your devices wherever they might be in your home or commercial space.
You’re not tied to one specific brand of products either. You can connect your existing audio gear of any kind and bring it to the modern area of wireless connectivity & control allowing for maximum versatility to meet your specific needs. Follow the sections below for a breakdown of the primary functions and use cases.
Bring Any Audio Source into Your Juke System
AudioMate makes it easy to take audio from external devices and distribute it across any of the speakers on your Juke amplifier. A few key examples would be as follows:
Televisions One of the most common uses is sending TV audio into your Juke system.
With AudioMate, you can:
Connect your TV via HDMI (ARC/eARC) or RCA Send that audio wirelessly to the speakers in the area that TV lives Add in other listening zones (backyard, kitchen) where you also want to listen to the TV Control the volume with your TV remote This allows you to incorporate your TV’s across all common areas of your house and hear the audio from the built-in speakers connected to the Juke Audio amp.
Surround Receivers (AVRs) If you already have a surround system, AudioMate lets you:
Take audio from your AV receiver (if it has an RCA preout) Send it into the Juke system Extend that audio into other rooms/zones This is a perfect bridge to seamlessly interconnect a main media / surround sound area with the speakers throughout the other areas when you want the same audio playing while entertaining.
Turntables, CD Players, and Legacy Sources
AudioMate also supports classic audio gear:
Turntables (with preamp) CD players Media players Laptops (via headphone jack) This allows you to:
Play vinyl throughout the home Share legacy sources across multiple zones Flexible Output Options
AudioMate also gives you the flexibility to bring in third party audio devices of all kinds and have them play in combination with the speaker zones on the Juke amplifier itself. This can be very beneficial if running speaker wire from certain areas to a centralized location is difficult or not feasible to do. The AudioMate can be placed wherever you need to add additional sound coverage and have it seamlessly integrated with the rest of your listening zones with the ability to send audio to it via all of the sources the Juke amplifier supports including Airplay 2, Spotify Connect, Built-In stream and more. A few key output devices we see are as follows:
Soundbar You can connect Audiomate in between a TV and soundbar in order to either have that TV audio play to the soundbar while also sending audio to the speaker zones on the Juke amp or to be able to stream audio from your phone to both the soundbar and the other speaker zones together.
This keeps your main viewing area optimized while still sharing audio elsewhere.
Subwoofer
The AudioMate RCA output allows you to:
Send audio to a powered subwoofer or subwoofer amplifier Add low-end support (bass) to specific zones Ideal for living rooms and entertainment spaces where you want an ideal listening experience with rich and full sound.
Send Audio to External Equipment
You can also output Juke audio to:
Powered speakers Third party amplifiers AV Receivers This helps you:
Expand beyond native zones Power larger speaker setups Integrate with existing systems Ideal for outlier zones where you might use an AV receiver to power surround sound or potentially even a 70-volt amplifier powering a landscape speaker system that you want to integrate with the speakers throughout the other areas of the home.
How Audiomate Works
AudioMate uses the same network as your Juke system to send and receive audio. It includes an Ethernet port for a wired connection, which is recommended, but it can also connect over WiFi if Ethernet is not available.
Once installed, AudioMate can be controlled through the Juke app:
Enable one Audiomate input (HDMI or RCA) Turn zones ON or OFF for the selected input Route audio from any Audiomate or Juke active input to one or both Audiomate outputs (HDMI and RCA) You can also control TV volume from the TV remote if connected from its HDMI (eARC/ARC) port.
Common Use Cases Whole-home TV audio Send audio from a TV to multiple zones throughout the home. This is ideal for open floor plans, entertaining, or keeping audio consistent as you move between rooms. For example, you can watch a game in the living room while hearing it in the kitchen, patio, or garage.
Bar and restaurant systems AudioMate is especially useful in commercial environments with multiple TVs. Each TV can connect to its own AudioMate, allowing you to:
Route audio from any TV to specific zones Play different games or channels in different areas Control volume and zone selection centrally through the Juke system This provides a clean, scalable alternative to traditional matrix systems.
Hybrid setups with physical media and streaming
Combine modern streaming with classic audio sources like:
Turntables (with phono preamp) CD players Cassette decks Media players AudioMate lets you distribute these sources across your entire Juke system, so you are not limited to a single room. This is perfect for users who want the convenience of streaming alongside their existing audio collection.
Expanding existing AV systems Integrate AudioMate into an existing AV setup to extend audio beyond a single room. You can:
Send audio from an AVR or media system into Juke zones Output Juke audio to external amplifiers, preamps, or receivers Add additional zones using third-party equipment This makes AudioMate a flexible tool for both new installations and retrofits.
Outdoor and entertainment spaces Bring TV or music audio to outdoor zones like patios, pool areas, or bars. AudioMate allows you to easily route indoor sources outside without additional complexity.
Multi-purpose rooms In spaces like home gyms, offices, or game rooms, AudioMate allows you to switch between sources such as TV audio, streaming music, or external devices without changing wiring.
The Bottom Line AudioMate turns your Juke system into a complete audio distribution platform.
Whether you are integrating TVs, adding legacy audio sources, or expanding outputs, AudioMate gives you the flexibility to build the system you want.
NOTE: The AudioMate is not a standalone product and must be paired with a Juke system on the same network to operate.
Heading 1 Heading 2 Heading 3 Heading 4 Heading 5 Heading 6 Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
Block quote Ordered list
Item 1 Item 2 Item 3 Unordered list
Text link
Bold text
Emphasis
Superscript
Subscript
